Mastering the Art of Assessment Validation and Validating Assessments
Mastering the Art of Assessment Validation and Validating Assessments
Blog Article
RTOs face many tasks after registration, such as annual declarations, AVETMISS reporting, and marketing compliance, but validation is typically the most daunting.
Although we have published several articles on validation, let’s revisit the term. ASQA describes validation as a quality review of the assessment process.
Put simply, validation checks which parts of an RTO's assessment process are accurate and spots areas for enhancement. A proper understanding of its main elements can make validation less daunting.
The SRTOs 2015 Clause 1.8 specifies that RTOs need to ensure compliance of their assessment systems, including RPL, with training package requirements, following the Principles of Assessment and Rules of Evidence.
According to the standards, two types of validation are necessary.
The primary type of assessment validation verifies that your RTO's assessment meets the training package requirements.
The second type of validation verifies assessments are conducted according to the principles of assessment and rules of evidence.
It suggests that validation takes place before and after the assessment. This article focuses on the first type—assessment tool validation.
Defining the Two Types of Assessment Validation
Assessment Validation Explained
As mentioned earlier and in our earlier blogs, validation is split into two parts: (1) assessment tool validation and (2) post-assessment validation.
Pre-assessment validation, or assessment tool validation, is concerned with the first part of the clause, which ensures all unit requirements are met and that workbooks are fully compliant.
In post-assessment validation, the emphasis is on implementation, ensuring that Registered Training Organisations conduct assessments as per the Principles of Assessment and Rules of Evidence.
This piece will highlight assessment tool validation.
Steps for Conducting Assessment Tool Validation
Understanding the two types of validation allows us to delve into the specifics of assessment tool validation.
When Assessment Tool Validation Should Be Done
The aim of assessment tool validation is to make sure that all elements, performance criteria, and performance and knowledge evidence are included in your assessment tools.
This means that whenever new learning resources are acquired, you must perform assessment tool validation before student use.
You don't have to wait for the next validation schedule in your 5-year cycle. Validate new resources as soon as you get them to ensure they’re suitable for students.
Still, this isn't the only reason for this type of validation. Conduct assessment tool validation when you:
- resources are updated by you
- when new training products are added on scope
- course gets reviewed against training product updates
- identifying your learning resources as a risk during your risk assessment
The Australian Skills Quality Authority employs a risk-based approach for regulating RTOs and expects regular risk assessments. Therefore, student complaints about learning resources are an ideal time to conduct assessment tool validation.
Choosing Training Products for Validation
Bear in mind, this validation aims to ensure compliance of all learning resources before use. All RTOs are required to validate all unit resources.
What Do You Need for Assessment Tool Validation?
Course Materials
Given that you are validating your assessment tools, you will need the complete array of your learning resources:
Mapping tool – the first document to review. It indicates which assessment items meet unit requirements, aiding in faster validation.
Learner/student workbook – check its suitability for use as an assessment tool. Verify clear instructions and sufficient answer fields. This is often a gap.
Assessor guide/marking guide – confirm that instructions for assessors are adequate and clear benchmarks for each assessment item exist. Clear benchmarks are crucial for reliable assessment outcomes.
Other related resources – might include checklists, registers, and templates developed independently from the workbook and marking guide. Validate them to confirm they fit the assessment task and address unit requirements.
Panel of Validators
Clause 1.11 specifies the criteria for validation panel members, indicating that validation can involve one or more persons. RTOs usually require all trainers and assessors to participate, sometimes including industry experts.
Together, your validation panel should possess:
Relevant vocational competencies and up-to-date industry skills for the unit being validated
Up-to-date expertise and skills in vocational teaching and learning
Any one of the following training and assessment qualifications:
TAE40116 Certificate IV in Training and Assessment or the equivalent successor
Validation instrument/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Having a validation tool supports the validation process and documentation. It simplifies understanding how each assessment item maps to each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Additionally, it can provide proof that you have validated your resources before students use them.
ASQA does not specify a recommended or required template for assessment tool validation, but many templates are accessible online. These tools usually have validators review the tools in their entirety to ensure they meet the principles of assessment.
Principles of Assessment Template Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
Though these templates simplify validation, they can lead to judgment errors due to limited space for comments on each assessment item.
It is highly advisable to use a more detailed template for evaluating each unit requirement and its corresponding assessment items. Below is an example:
Element Performance Criteria Instructions for Assessment Benchmarks Assessment Tools Rectification Recommendations
What do you Need to Check?
What Needs Inspection?
As stated in our blog post Common Problems In Assessment Tools, you must ensure your assessment tools allow trainers to adhere to assessment principles and evidence rules.
Assessment Key Principles
Fairness – Is equal opportunity and access provided to everyone in the assessment process?
Flexibility – Are different options available in the assessment to demonstrate competence based on individual needs and preferences?
Validity – Is the assessment testing what it is meant to test? Is it a valid tool for assessing the required skill or knowledge?
Reliability – Will the assessment yield the same results each time, no matter who more info conducts the training? Will different assessors make consistent decisions on skill competence?
Basic Rules of Evidence
Validity – Is the evidence verifying that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there sufficient evidence to ensure the learner has the required skills and knowledge?
Authenticity – Does the assessment tool ensure that the work is the candidate’s own?
Currency – Are the assessment tools based on current units of competency and up-to-date industry practices?
Although these are frequently covered in VET professional development and nationally recognised training, many tools still struggle to meet these requirements.
To prevent using learning resources that do not meet some unit requirements, make sure to follow these guidelines:
Be Consistent with Your Teachings
Pay attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:
Complete each of the following activities at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication according to service and regulatory requirements:
changing diapers
bottle preparation, bottle-feeding babies, and cleaning equipment
prepare solid food and feed infants
respond properly to baby signs and cues
prepare and settle babies for sleep
monitor and promote physical exploration and gross motor skills suitable for the age
Having students describe the nappy-changing process for babies under 12 months old doesn’t directly meet the unit requirement. Unless the unit requirement is meant to assess underpinning knowledge (i.e., knowledge evidence), students should be performing the tasks.
Notice the Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In the CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t meet the requirement.
All Requirements or Not Competent
Observe the lists. As noted above, if students are asked to perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Could You Be Clearer?
Each assessment item needs clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Therefore, it’s important that your instructions are not confusing for students or assessors. For instance:
What kind of information can be included in a work package?
What type of information can be included in a work package?
The answer may include:
Needed materials
Corresponding costs
Time frame for activities
Assigned functions and responsibilities
When an assessment item calls for multiple answers, indicate the number of answers a student needs to provide. This way, your assessment is reliable, and the evidence gathered is valid.
The same applies to assessment items with double-barrelled questions or those asking for multiple answers simultaneously. These can confuse both students and assessors, as shown in the sample question below:
Name a hazard and/or environmental issue in the work area and pick the most effective hazard control hierarchy.
Answers may include, but are not limited to:
Weather conditions – isolating the work area, engineering, personal protective equipment
Work area and ground conditions – eliminating hazards, isolating, engineering controls
People – isolating, engineering, administration
Structural hazards – substitution, isolating, engineering controls
Chemical hazards – isolation, use of engineering controls, administration
Equipment or machinery – isolating, engineering, administration
Steering clear of double-barrelled questions simplifies responses for students and enables assessors to accurately judge competence.
Considering these requirements, you might think, “Don’t learning resource developers have audit guarantees?” But such guarantees require you to wait for an audit before rectifying noncompliance. This affects your compliance history, so it’s better to take a safe and compliant route.